Quick-Link:  Technical data -  dimensions - equipment

The INTEGRAL system combines high-pressure pump and membrane vessel in a single element. This eliminates the installation of high-pressure hoses. The assembly will be much easier.

Output 30 litres/hour DC driven (12 or 24 Volts) Extremely low power consumption - only 6.5 amps /litres

What is next?

Technical data

The performance of the reverse osmosis process depends on the temperature and salinity of the water. The above values were determined at 26 degree Celsius water and a salinity of 35,000 ppm TDS.

Dimensions

What is next?

Equipment

1. Pump

1x High pressure pump (stainless steel) including membrane pressure vessel

2. Prefilter

1 x Strainer
1 x Prefilter
1 x Flush filter

3. Feeder pump
1 x Feederpump 12 or 24V

4. Membrane
1 x Ready to use mounted TFC membrane

4. Control panel
1x stainless steel - pressure gauge
1x flow meter
1x product water walve

Hose connection:
Seawater entry to high boost pump - 19mms (3/4")
Boost pump to high pressure pump - 19mms (3/4")
Fresh water PVC-hose - 10mms quick connect
Waste water hose - 19mms (3/4")

What is next?